鍘刀式分板機的主要功能簡單介紹
現在市面上的分板機的種類已經多的數不甚數了，但是在眾多的分板機中，鍘刀式分板機的使用范圍還是比較廣泛的。比如說，使用鍘刀式分板機切割薄板;比如說，使用鍘刀式分板機切割精密的SMD，等等?！∧敲礊槭裁村幍妒椒职鍣C(jī)的使用范圍可以這么的廣呢?我覺得這與鍘刀式分板機的性能還是有很大的關系的。下面我就具體的來了解一下鍘刀式分板機的主要性能。
Now on the market the type of the board machine has been many, the number is not very many, but in many of the board machine, the use of knife type board machine is still relatively wide. For example, the use of a cutter type plate splitter to cut thin plates; for example, the use of a cutter type plate splitter to cut precision SMD, and so on. So why can the range of use of the cutter type plate splitter be so wide? I think it has a lot to do with the performance of the cutter type plate splitter. Now I will specifically understand the main performance of the chopper type board machine.
首先，鍘刀式分板機的切割率十分的快，據我了解已經達到一秒一分割的速度了。鍘刀式分板機的切割速度之所以這么的快，是因?yàn)殄幍妒椒职鍣C(jī)采用的是腳踏板啟動開關控制的。
First of all, the cutting rate of the chopper is very fast. As far as I know, it has reached the speed of one minute per second. The reason why the cutting speed of the chopper is so fast is that it is controlled by the pedal start switch.
其次，鍘刀式分板機切割準確度大，由于鍘刀式分板機采用的是被動啟動方式，所以在掌握切割線的位置方面可以做到十分的精確，并且使用鍘刀式分板機切割一般不會出現龜裂的現象。
Secondly, the cutting accuracy of the cutter type plate splitting machine is large, because the cutter type board machine adopts the passive starting mode, so it can be very accurate in mastering the position of the cutting line. And the use of chopper type plate cutting machine generally will not appear cracking phenomenon.
最后，鍘刀式分板機環保性好。一般的分板機都是采用的摩擦式切削方式進行分板操作，但是鍘刀式分板機卻不是采用的這種切割方式，所以很好的避免了分板中的金屬殘留，從而更加的環保
Finally, the cutter type plate splitter has good environmental protection. Generally, the friction type cutting mode is used for the plate splitting operation, but the cutter type plate splitting machine is not used in this way, so it is very good to avoid the metal residue in the plate, so it is more environmentally friendly
中文版 
English1
